---
title: "Calculating standardized survival measures in flexsurv"
author: "Michael Sweeting^[mikesweeting79@gmail.com]"
output: rmarkdown::html_vignette
vignette: >
%\VignetteIndexEntry{Calculating standardized survival measures in flexsurv}
%\VignetteEngine{knitr::rmarkdown}
%\VignetteEncoding{UTF-8}
bibliography: "standsurv.bib"
---
```{r, include = FALSE}
knitr::opts_chunk$set(
fig.dim = c(8, 6),
collapse = TRUE,
comment = "#>"
)
```
# Background
## Standardized survival measures
`standsurv` is a post-estimation command that takes a `flexsurvreg` object and calculates standardized survival measures. After fitting a parametric survival model in `flexsurv` it is often useful to compute and visualise the marginal (or standardized) survival. For example, suppose a survival model is fitted adjusted for treatment group, age, and sex. A separate predicted survival curve can be obtained for each individual based on their covariate pattern or a prediction can be obtained by setting covariates to their mean values (both can be obtained using `summary.flexsurvreg`), but it may be more useful to obtain the marginal survival for each treatment group. Regression standardization achieves this by fitting a regression model including the treatment group $Z$, covariates $X$ and possible interactions between $X$ and $Z$. The standardized survival can be estimated by obtaining predictions for every individual in the study under each fixed treatment arm and averaging these individual-specific estimates. The marginal survival over the distribution of covariates in the study assuming all participants were assigned to arm $Z=z$ is:
\begin{equation}
S_s(t|Z=z) = E[S(t | Z=z, X)] = \frac{1}{N} \sum_{i=1}^{N} S(t | Z=z, X=x_i)
\end{equation}
for covariate values (vectors) $x_1,...,x_{N}$. Here standarization is done over all $N$ patients in the study and provides a counterfactual marginal estimate when setting $Z=z$. The standardized survival is therefore an estimate of the marginal survival if all study patients had been assigned to group $z$. Under certain assumptions, differences in marginal survival provide estimates of causal effects (@syriopoulou_inverse_2021) and certain estimands such as the average treatment effect (ATE) can be targeted:
$$ ATE = S_s(t|Z=z_1) - S_s(t|Z=z_0)]$$
Alternatively, an average treatment effect in the treated (ATET) estimand can be targeted by averaging over only patients who were in the intervention treatment arm $Z=z_1$. Standardization estimates can also be obtained for other target populations of interest. For example it may be important to predict survival in an external population with different characteristics to the study population.
The hazard function for the standardized survival can be obtained to understand how the shape of the hazard changes over time. This provides an estimate of the marginal hazard. It can be shown (@rutherford_nice_2020, Appendix I) that the hazard of the standardized survival can be calculated as
\begin{equation}
h_s(t|Z=z) = \frac{\sum_{i=1}^{N} S(t|Z=z,X=x_i)h(t|Z=z,X=x_i)}{\sum_{i=1}^{N} S(t | Z=z, X=x_i)}
\end{equation}
This is a weighted average of the $N$ individual hazard functions, weighted by the probability of survival at time $t$. Patients who are unlikely to have survived to $t$ will contribute less weight to this hazard function.
## Calculating marginal expected survival and hazard
In economic evaluations parametric survival models are used to extrapolate clinical trial data to estimate lifetime benefits. In this context it is often useful to plot marginal 'expected' (general population) survival alongside parametric models fitted and extrapolated from trial data in order to aid interpretation and for a visual comparison between the trial subjects and the population at large. Displaying expected survival and hazard functions can aid understanding of whether the assumed hazard and survival functions are credible (@rutherford_nice_2020). Expected survival is defined as the all-cause survival in a general population with the same key characteristics as the study subjects. General population mortality rates are often taken from national lifetables that are stratified by age, sex, calendar year and occasionally other prognostic factors (e.g. deprivation indices).
The Ederer or "exact" method for estimating expected survival assumes subjects in the trial population are not censored before the end of a stated follow-up time [@ederer_relative_1961]. The expected survival is then the survival we would expect to see in an age-sex matched general population if all patients are continuously followed-up. This is the approach used by `standsurv` to calculate expected survival and is the "most appropriate when doing forcasting, sample size calculations or other predictions of the 'future' where censoring is not an issue" [@therneau_1999].
Based on the exact method, the marginal expected survival using background mortality rates is calculated using all $N$ patients in the trial at any time point $t$:
\begin{equation}
S^*(t) = \frac{1}{N} \sum_{i=1}^N S_i^*(t)
\end{equation}
where $S_i^*(t)$ is the expected survival for the $i$th subject at time $t$.
It follows that the marginal expected hazard is a weighted average of the expected hazard rates:
\begin{equation}
h^*(t) = \frac{
\sum_{i=1}^N S_i^*(t) h_i^*(t)}{\sum_{i=1}^N S_i^*(t)}
\end{equation}
The expected survival for the $i$th subject at follow-up time $t$ is calculated based on matching to the general population hazard rates. If lifetables are utilised these often provide mortality rates by sex ($s$), age ($a$) and calendar year ($y$), in yearly or 5-yearly categories. In practice the expected survival at time $t$ for a given subject is calculated from the cumulative hazard. At a given follow-up time $t$ this is the sum of $h^*_{asy} \times \textrm{Number of days in state } (a,s,y)$ in the follow-up where $h^*_{asy}$ is the expected hazard for age $a$, sex $s$, year $y$. This requires follow-up time for each individual in the study dataset to be split by multiple timescales (e.g. age and year) into time epochs, which can be visualised as a Lexis diagram. Each epoch can then be matched to a corresponding expected mortality rate.
## Incorporation of background mortality into survival models
Incorporating background mortality into survival models directly is recommended as it helps avoid extremely implausible projections (@rutherford_nice_2020). This can be done using an excess mortality / relative survival model where population based 'expected' rates, often from life tables, are introduced to explain background mortality. The concept behind these models is to partition the all-cause mortality into excess mortality caused by the disease of interest and that due to other causes. A parametric model can then be applied to the isolated excess mortality. This may be particularly useful when making long-term extrapolations as the pattern of disease-specific mortality and other cause mortality are likely to be very different over time. Alternatively, if cause of death information is available and reliable, a separate cause-specific model can be fitted to the disease-specific mortality and other cause mortality.
The all-cause mortality rate at time $t$ for individual $i$ can be partitioned into two constituent parts:
\begin{equation} h_i(t) = h^*_i(t) + \lambda_i(t) \end{equation}
where $h_i(t)$ is the all-cause mortality rate (hazard), $h^*_i(t)$ is the expected or background mortality rate and $\lambda_i(t)$ is the excess mortality rate. Equivalently, the hazard rates can be transformed to the survival scale which gives the all-cause survival at time $t$ as the product of the expected survival and the relative survival:
\begin{equation} S_i(t) = S^*_i(t) R_i(t) \end{equation}
The relative survival, $R_i(t)$, is therefore the ratio of all-cause survival and the expected survival in the background population.
Typically, $h_i^*(t)$ (and hence $S_i^*(t)$) are obtained from population lifetables. The expected mortality rates are assumed to be fixed and known and a parametric model is then used to estimate the relative survival (or equivalently excess hazard).
# `standsurv`
`standsurv` is a post-estimation command that takes a `flexsurv` regression and calculates standardized survival measures and contrasts. Expected mortality rates and survival can also be obtained. The main features of the command are that it enables the calculation and plotting over any specified follow-up times of
1. Marginal survival, hazard and restricted mean survival time (RMST) metrics
2. Marginal expected (population) survival and hazard functions matched to the study population
3. Marginal all-cause survival and all-cause hazard after fitting relative survival models
4. Contrasts in survival, hazard and RMST metrics (e.g. marginal hazard ratio, differences in marginal RMST)
5. Confidence intervals and standard errors for all measures and contrasts using either the delta method or bootstrapping
Through a simple syntax the user can specify the groups that they wish to calculate the marginal metrics. These groups can be formed by any combination of covariate values.
## A worked example: the pbc dataset
For this example we will use data from the German Breast Cancer Study Group 1984-1989, which is the R dataset `bc` found in the `flexsurv` package. This dataset has death, or censoring times for 686 primary node positive breast cancer patients together with a 3-level prognostic group variable with levels "Good", "Medium" and "Poor". For this demonstration we collapse the prognostic variable into 2 levels: "Good" and "Medium/Poor". We also create some artificial ages and diagnosis dates for the patients, along with assuming all patients are female. We allow a correlation between the age at diagnosis for a patient and their survival time so that age is a prognostic variable. The mean age is 65 with a standard deviation of 5. We load this dataset and create these additional variables.
```{r, message = FALSE, warning = FALSE}
library(flexsurv)
library(flexsurvcure)
library(ggplot2)
library(dplyr)
library(survminer)
```
```{r}
data(bc)
set.seed(236236)
## Age at diagnosis is correlated with survival time. A longer survival time
## gives a younger mean age
bc$age <- rnorm(dim(bc)[1], mean = 65 - scale(bc$recyrs, scale=F), sd = 5)
## Create age at diagnosis in days - used later for matching to expected rates
bc$agedays <- floor(bc$age * 365.25)
## Create some random diagnosis dates between 01/01/1984 and 31/12/1989
bc$diag <- as.Date(floor(runif(dim(bc)[1], as.Date("01/01/1984", "%d/%m/%Y"),
as.Date("31/12/1989", "%d/%m/%Y"))),
origin="1970-01-01")
## Create sex (assume all are female)
bc$sex <- factor("female")
## 2-level prognostic variable
bc$group2 <- ifelse(bc$group=="Good", "Good", "Medium/Poor")
head(bc)
```
A plot of the Kaplan-Meier shows a clear separation in the survival curves between the two prognostic groups.
```{r}
km <- survfit(Surv(recyrs, censrec)~group2, data=bc)
kmsurvplot <- ggsurvplot(km)
kmsurvplot + xlab("Time from diagnosis (years)")
```
## A stratified Weibull model
We start by fitting a Weibull model to each group separately. One way to do this is to fit a single saturated model whereby group affects both the scale and shape parameters of the Weibull distribution. This effectively means we have a separate scale and shape parameter for each group, which is equivalent to fitting two separate models. Such a model does not make a proportional hazards assumption and hence the hazard ratio will change over time. The saturated model approach has advantages as we can use the model to easily investigate treatment effects using `standsurv` as we shall see later. Including group in the main formula of `flexsurvreg` allows group to affect the scale parameter of the Weibull distribution whilst we use the `anc` argument in `flexsurvreg` to additionally allow group to affect the shape parameter.
```{r}
model.weibull.sep <- flexsurvreg(Surv(recyrs, censrec)~group2,
anc = list(shape = ~ group2),
data=bc, dist="weibullPH")
model.weibull.sep
```
Given that the model only contains `group2` and no other covariates we can obtain the predicted (fitted) survival for each of the two groups using the `summary` function and storing these predictions in a tidy data.frame with the argument `tidy=T`.
```{r}
predictions <- summary(model.weibull.sep, type = "survival", tidy=T)
ggplot() + geom_line(aes(x=time, y=est, color = group2), data=predictions) +
geom_step(aes(x=time, y=surv, group=strata), data=kmsurvplot$data.survplot)
```
The Weibull model does not appear to fit the data very well and so we should try other parametric distributions. However, for illustration purposes we shall continue using the Weibull model. We will now show that the same predictions can be obtained from `standsurv` but with the benefit of addition flexibility.
## Using `standsurv` to calculate marginal survival
`standsurv` works similarly to the `margins` command in `R` and `standsurv` in Stata by allowing the user to specify a list of scenarios in which specific covariates are fixed to certain values. This is done using the `at` argument of `standsurv` to provide the list of scenarios where each scenario is itself a list containing covariates that are to be fixed. In our worked example the two scenarios are `list(group2 = "Good")` and `list(group2 = "Medium/Poor")`. Any covariates not specified in the `at` scenarios are averaged over, hence creating marginal, or standardized, estimates of the metric of interest. In the example above, there are no other covariates in the model so we will get the same answer as obtained from `summary`. But the later worked example extends this to models containing other covariates. The default is to calculate survival probabilities at the event times in the data but this can be changed with the `type` and `t` arguments, respectively. The returned object is a tidy data.frame with columns named `at1` up to `atn` for the n scenarios specified in the `at` argument.
```{r}
ss.weibull.sep.surv <- standsurv(model.weibull.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")))
ss.weibull.sep.surv
```
Further details such as labels for the `at` scenarios are stored in attributes of the `standsurv` object. These are utilised by the `plot` function. A plot of the marginal estimates can be easily produced using the `plot` function, which produces a `ggplot` object.
```{r}
plot(ss.weibull.sep.surv)
```
The plot can be easily further manipulated, for example by changing axis labels and adding further plots.
```{r}
plot(ss.weibull.sep.surv) + xlab("Time since diagnosis (years)") +
geom_step(aes(x=time, y=surv, group=strata), data=kmsurvplot$data.survplot)
```
## Other metrics: marginal hazards and marginal RMST
We can use the `type` argument to calculate marginal hazards or restricted mean survival time (RMST). For example a plot of the hazard functions for the two groups is obtained as follows:
```{r}
ss.weibull.sep.haz <- standsurv(model.weibull.sep,
type = "hazard",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")))
plot(ss.weibull.sep.haz) + xlab("Time since diagnosis (years)")
```
Whilst a plot of RMST is given by
```{r}
ss.weibull.sep.rmst <- standsurv(model.weibull.sep,
type = "rmst",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")))
plot(ss.weibull.sep.rmst) + xlab("Time since diagnosis (years)")
```
## Calculating contrasts
The advantage of fitting a saturated model now becomes clear as we can calculate contrasts between our `at` scenarios. Suppose we are interested in the difference in the survival functions between the two groups. This is easily calculated using the `contrast = "difference"` argument, and a plot of the contrast can be obtained using `contrast = TRUE` argument in the `plot` function.
```{r}
ss.weibull.sep.3 <- standsurv(model.weibull.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
contrast = "difference")
plot(ss.weibull.sep.3, contrast=TRUE) + xlab("Time since diagnosis (years)") +
ylab("Difference in survival probabilities") + geom_hline(yintercept = 0)
```
Alternatively, we may wish to visualise the implied hazard ratio from fitting separate Weibull models to the two groups. In the breast cancer example we see that the hazard ratio (treatment effect) starts very high before decreasing, suggesting that those with Medium/Poor prognosis start with a high elevated risk but have a continued excess risk up to the end of follow-up, compared to those with Good prognosis.
```{r}
ss.weibull.sep.4 <- standsurv(model.weibull.sep,
type = "hazard",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
contrast = "ratio")
plot(ss.weibull.sep.4, contrast=TRUE) + xlab("Time since diagnosis (years)") +
ylab("Hazard ratio") + geom_hline(yintercept = 1)
```
## Confidence intervals and standard errors
Confidence intervals and standard errors for both the metric of interest and contrasts can be obtained either through bootstrapping or using the delta method. Bootstrap confidence intervals are calculated by specifying `ci = TRUE`, `boot = TRUE`, and providing the number of bootstrap samples using `B`. We can also set the seed using the `seed` argument to allow reproducibility.
If instead the delta method is to be used to obtain confidence intervals then we specify `ci = TRUE`, `boot = FALSE`. The delta method obtains confidence intervals by calculating standard errors for a given transformation of the metric of interest and then assuming normality. The default is to use a log transformation; hence if `type = "survival"` the confidence intervals are symmetric for the log survival probabilities. Alternative transformations can be specified using the `trans` argument.
The code below shows confidence intervals for marginal survival calculated through a bootstrap method (with `B = 100`) compared to a delta method. For computational efficiency here we only predict for 10 time points.
```{r}
ss.weibull.sep.boot <- standsurv(model.weibull.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,7,length=10),
ci = TRUE,
boot = TRUE,
B = 100,
seed = 2367)
ss.weibull.sep.deltam <- standsurv(model.weibull.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,7,length=10),
ci = TRUE,
boot = FALSE)
plot(ss.weibull.sep.boot, ci = TRUE) +
geom_ribbon(aes(x=time, ymin=survival_lci, ymax=survival_uci, color=at, linetype = "Delta method"), fill=NA,
data=attr(ss.weibull.sep.deltam,"standpred_at")) +
scale_linetype_manual(values = c("Bootstrap" = "solid", "Delta method"= "dashed")) +
ggtitle("Comparison of bootstrap and delta method confidence intervals")
```
## Adding age as a covariate
Suppose age has been added as a covariate to the survival model. If age is not included in our `at` scenarios `standsurv` will by default produce standardized estimates of survival averaged over the age distribution in our study population. Alternatively we could pass a new prediction dataset to `standsurv` and obtain standardized estimates for this population. As an example, we obtain marginal survival estimates after fitting a stratified Weibull model, firstly standardized to the age-distribution of our study population and secondly standardized to an older population with mean age of 75 and standard deviation 5.
```{r}
model.weibull.age.sep <- flexsurvreg(Surv(recyrs, censrec)~group2 + age,
anc = list(shape = ~ group2 + age),
data=bc, dist="weibullPH")
## Marginal survival standardized to age distribution of study population
ss.weibull.age.sep.surv <- standsurv(model.weibull.age.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,7,length=50)
)
## Marginal survival standardized to an older population
# create a new prediction dataset as a copy of the bc data but whose ages are drawn from
# a normal distribution with mean age 75, sd 5.
newpred.data <- bc
set.seed(247)
newpred.data$age = rnorm(dim(bc)[1], 75, 5)
ss.weibull.age2.sep.surv <- standsurv(model.weibull.age.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,7,length=50),
newdata=newpred.data)
## Overlay both marginal survival curves
plot(ss.weibull.age.sep.surv) +
geom_line(aes(x=time, y=survival, color=at, linetype = "Older population"),
data = attr(ss.weibull.age2.sep.surv, "standpred_at") ) +
scale_linetype_manual(values = c("Study" = "solid", "Older population"= "dashed"))
```
## Calculating expected survival and hazard in `standsurv`
To overlay marginal expected survival or hazard curves we require a lifetable of population hazard rates. To demonstrate we use the US lifetable that comes with the `survival` package, called `survexp.us`. Other lifetables can be obtained directly from the Human Mortality Database (HMD) using the `HMDHFDplus` package.
The `survexp.us` lifetable is a `ratetable` object with stratification factors age, sex and year. It gives rates of mortality per person-day for combinations of the stratification factors. A summary of the `survexp.us` object shows that the time-scale is in days.
```{r}
summary(survexp.us)
```
To use the lifetable to get expected rates for our trial population we need to match age, sex and year variables in our dataset to those in the ratetable. We can use the `rmap` argument to do this. `standsurv` utilises the `survexp` function in the `survival` package to calculate expected survival over the times specified in `t` using the 'exact' method of Ederer. We note that sex in our data is coded the same as in the `ratetable` ("male" and "female") and importantly that we have variables that record both age at diagnosis and diagnosis date in days. It is important that the user ensures that the study data are correctly coded and have variables on the same timescale as in the `ratetable` so that matching is successful. The code below demonstrates that for our data we therefore need to match the `year` variable in the `ratetable` to the `diag` variable in our study data, and the `age` variable in the `ratetable` to the `agedays` variable in our study data.
We need to specify three more arguments in `standsurv`. First, the lifetable, which must be a `ratetable` object and is specified using the `ratetable` argument. Second, we may need to pass our trial dataset to `standsurv` if the stratifying factors do not appear as covariates in the `flexsurv` model. Finally, we need to be careful to tell `standsurv` what the time scale transformation is between the fitted `flexsurv` model and the time scale in `ratetable`. We can use the `scale.ratetable` argument to do this. Typically ratetable objects are expressed in days (e.g. rates per person-day). The default is therefore `scale.ratetable = 365.25`, which indicates that the survival model was fitted in years but the ratetable is in days.
After running `standsurv` we can plot the expected survival (or hazard) by using the argument `expected = TRUE` in the `plot()` function.
```{r}
ss.weibull.sep.expected <- standsurv(model.weibull.sep,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,7,length=50),
rmap=list(sex = sex,
year = diag,
age = agedays
),
ratetable = survexp.us,
scale.ratetable = 365.25,
newdata = bc
)
plot(ss.weibull.sep.expected, expected = T)
```
We can see that the marginal expected survival is much higher than the marginal (predicted) survival for our breast cancer population. We can also obtain the expected hazards:
```{r}
ss.weibull.sep.expectedh <- standsurv(model.weibull.sep,
type = "hazard",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,7,length=50),
rmap=list(sex = sex,
year = diag,
age = agedays
),
ratetable = survexp.us,
scale.ratetable = 365.25,
newdata = bc
)
plot(ss.weibull.sep.expectedh, expected = T)
```
The hazard plot shows that our model is predicting an increasing hazard over time for the cancer population, which remains significantly higher than the expected hazard in the general population. The monotonically increasing hazard imposed by the Weibull distribution may be implausible and this may make us question the suitability of a Weibull model if we wish to extrapolate.
## Incorporation of background mortality
A relative survival model can be fitted using `flexsurv` by incorporating background mortality rates. The model then estimates excess hazard rates and relative survival measures. For prediction purposes, following the fitting of a relative survival model, `standsurv` allows the user to either obtain marginal predictions of relative survival / excess hazard or of all-cause survival / all-cause hazard. The latter are calculated by multiplying relative survival estimates with expected survival to get all-cause survival, or by adding excess hazard rates to expected hazard to get all-cause hazard.
We demonstrate this by fitting a relative survival cure model to the breast cancer data and obtaining predicted all-cause survival and all-cause hazard up to 30-years after diagnosis. A mixture cure model makes the assumption that a proportion of the study population will never experience the event. In a relative survival framework the cure model assumes that the excess mortality rate approaches zero (or equivalently the relative survival reaches an asymptote determined by the cure fraction). We fit a relative survival cure model with a Weibull distribution assumed for the uncured.
The relative survival mixture-cure model is fitted below. We must pass to `flexsurvcure` the expected hazard rates at the event / censoring time for each individual, as it is the expected rates at the event times that are used in the likelihood function for a parametric relative survival model. For this we need to initally do some data wrangling. Firstly, we calculate attained age and attained year (in whole years) at the event time for all study subjects. Secondly, we join the data with the expected rates using the matching variables attained age, attained year and sex. In the example, we express the expected rate as per person-year as this is the timescale used in the flexsurv regression model.
```{r}
## reshape US lifetable to be a tidy data.frame, and convert rates to per person-year as flexsurv regression is in years
survexp.us.df <- as.data.frame.table(survexp.us, responseName = "exprate") %>%
mutate(exprate = 365.25 * exprate)
survexp.us.df$age <- as.numeric(as.character(survexp.us.df$age))
survexp.us.df$year <- as.numeric(as.character(survexp.us.df$year))
## Obtain attained age and attained calendar year in (whole) years
bc <- bc %>% mutate(attained.age.yr = floor(age + recyrs),
attained.year = lubridate::year(diag + rectime))
## merge in (left join) expected rates at event time
bc <- bc %>% left_join(survexp.us.df, by = c("attained.age.yr"="age",
"attained.year"="year",
"sex"="sex"))
# A stratified relative survival mixture-cure model
model.weibull.sep.rs <- flexsurvcure(Surv(recyrs, censrec)~group2,
anc = list(shape = ~ group2,
scale = ~ group2),
data=bc, dist="weibullPH",
bhazard=exprate)
model.weibull.sep.rs
```
We can now use `standsurv` to obtain all-cause survival and hazard predictions using `type = "survival"` and `type = "hazard"`. If instead we had wanted predictions of relative survival or excess hazards we would use `type = "relsurvival"` and `type = "excesshazard"`, respectively.
```{r}
## All-cause survival
ss.weibull.sep.rs.surv <- standsurv(model.weibull.sep.rs,
type = "survival",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,30,length=50),
rmap=list(sex = sex,
year = diag,
age = agedays
),
ratetable = survexp.us,
scale.ratetable = 365.25,
newdata = bc
)
plot(ss.weibull.sep.rs.surv, expected = T)
# All-cause hazard
ss.weibull.sep.rs.haz <- standsurv(model.weibull.sep.rs,
type = "hazard",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,30,length=50),
rmap=list(sex = sex,
year = diag,
age = agedays
),
ratetable = survexp.us,
scale.ratetable = 365.25,
newdata = bc
)
plot(ss.weibull.sep.rs.haz, expected = T)
```
The marginal excess hazard is now unimodal since the cure model is forcing the initially increasing excess hazard to tend to zero in the long-term where only 'cured' subjects remain. The marginal all-cause hazard tends to the expected hazard and follows it thereafter.
A plot of the excess hazard confirms this.
```{r}
# Excess hazard
ss.weibull.sep.rs.excesshaz <- standsurv(model.weibull.sep.rs,
type = "excesshazard",
at = list(list(group2 = "Good"),
list(group2 = "Medium/Poor")),
t = seq(0,30,length=50),
rmap=list(sex = sex,
year = diag,
age = agedays
),
ratetable = survexp.us,
scale.ratetable = 365.25,
newdata = bc
)
plot(ss.weibull.sep.rs.excesshaz)
```
# Conclusions
`standsurv` is a powerful post-estimation command that allows easy calculation of a number of useful prediction metrics. Contrasts can be made between any counterfactual populations of interest and, through regression standardisation, allows the targeting of marginal estimands. Confidence intervals, via the delta method or bootstrapping, are available and benchmarking against or incorporating background mortality rates is also supported.
# References