*Gurobi* is the most powerful and fastest solver that the *prioritizr R* package can use to solve conservation planning problems (see the *Solver benchmarks* vignette for further details). This guide will walk you through the process of setting up *Gurobi* on your computer so that it can be used to solve conservation planning problems. If you encounter any problems while following the instructions below, please refer to the official *Gurobi* documentation.

*Gurobi* is a commercial computer program. This means that users will need to obtain a license for *Gurobi* before they can use it. Although academics can obtain a special license at no cost, individuals that are not affiliated with a recognized educational institution may need to purchase a license. If you are an academic that is affiliated with a recognized educational institution, you can take advantage of the special academic license to use *Gurobi* for no cost. Once you have signed up for a free account you can request a free academic license.

Once you accept the Terms Of Service you can generate a license.

Now, copy and save the `grbgetkey XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX`

command for later use.

After obtaining a license, you will need to download the *Gurobi* installer to your computer. To achieve this, visit the *Gurobi* downloads web page and download the correct version of the installer for your operating system.

The process for installing the *Gurobi* software depends on the operating system on your computer. Fortunately, *Gurobi* provide platform-specific “Quick Start Guides” for Windows, MacOS, and Linux systems that should help with this. Briefly, on Windows systems, you just need to double-click on the *Gurobi* installer, follow the prompts, and the installer will automatically handle everything for you. On Linux and MacOS systems, you will need to manually extract the downloaded file’s contents to a folder, move the extracted contents to a suitable location (typically */opt/gurobi*), and update your system’s variables so that it knows where to find *Gurobi* (i.e., the `PATH`

variable).

Additionally, if you are using *RStudio* on a Linux system, you might need to add the following text to a Rstudio configuration file (located at `/etc/rstudio/rserver.conf`

).

`rsession-ld-library-path=/opt/gurobi650/linux64/lib`

After installing the *Gurobi* software suite on your computer, you will need to activate your license.

Now we will activate the *Gurobi* software using the license you obtained earlier. Please note that the correct set of instructions depends on your system and license. To activate the license, simply copy and paste the `grbgetkey`

command into your computer’s command prompt or terminal (note that Windows users can open the command prompt by typing `cmd`

in the search box and pressing the `enter`

key). After running the `grbgetkey`

command with the correct license code, you should see output that resembles the following screen shot.

Next, we will now check that the license has been successfully activated. To achieve this, we will try running *Gurobi* directly from the command line. Note that the following commands assume you are using version 8.0.0 of *Gurobi*, and so you will need to modify the command if you are using a more recent version (e.g., if using version 9.1.2, then use `gurobi912`

instead of `gurobi800`

below).

On Windows systems, users can type in the following system command to check their license activation.

On Linux and MacOS systems, users can type in the following system command.

If the license was successfully activated, you should see output that resembles the screen shot below.

After activating the license, you now need to install the *gurobi R* package. This is so that you can access the *Gurobi* software from within the R statistical computing environment, and enable the *prioritizr* package to interface with the *Gurobi* software.

Now we will install the *gurobi R* package. This package is not available on the Comprehensive R Archive Network and is instead distributed with the *Gurobi* software suite. Specifically, the *gurobi* *R* package should be located within the folder where you installed the *Gurobi* software suite. We will install the *gurobi* *R* package by running the following *R* code within your *R* session. Note that the following code assumes that you are using version 8.0.0 of *Gurobi*, and so you will need to modify the code if you are using a more recent version (e.g., if using version 9.1.2, then use `gurobi912`

instead of `gurobi800`

below).

Assuming you installed *Gurobi* in the default location, Windows users can install *gurobi* *R* package using the following code.

Similarly, Linux and MacOS users can install the *gurobi* *R* package using the following code.

```
install.packages(
file.path(
Sys.getenv("GUROBI_HOME"),
"R/gurobi_8.0-0_R_x86_64-pc-linux-gnu.tar.gz"
),
repos = NULL
)
```

Next, you will need to install the *slam R* package because the *gurobi* *R* package needs this package to work. Users of all platforms (i.e., Windows, Linux, and MacOS) can install the package using the following *R* code.

Let’s check that the *gurobi* *R* package has been successfully installed. To do this, we can try using the *gurobi R* package to solve an optimization problem. Copy and paste the *R* code below into *R*.

`## Loading required package: slam`

```
# create optimization problem
model <- list()
model$obj <- c(1, 1, 2)
model$modelsense <- "max"
model$rhs <- c(4, 1)
model$sense <- c("<", ">")
model$vtype <- "B"
model$A <- matrix(c(1, 2, 3, 1, 1, 0), nrow = 2, ncol = 3,
byrow = TRUE)
# solve the optimization problem using Gurobi
result <- gurobi(model, list())
```

```
## Gurobi Optimizer version 10.0.1 build v10.0.1rc0 (linux64)
##
## CPU model: AMD Ryzen Threadripper 3960X 24-Core Processor, instruction set [SSE2|AVX|AVX2]
## Thread count: 24 physical cores, 48 logical processors, using up to 24 threads
##
## Optimize a model with 2 rows, 3 columns and 5 nonzeros
## Model fingerprint: 0xba2d0add
## Variable types: 0 continuous, 3 integer (3 binary)
## Coefficient statistics:
## Matrix range [1e+00, 3e+00]
## Objective range [1e+00, 2e+00]
## Bounds range [0e+00, 0e+00]
## RHS range [1e+00, 4e+00]
## Found heuristic solution: objective 2.0000000
## Presolve removed 2 rows and 3 columns
## Presolve time: 0.00s
## Presolve: All rows and columns removed
##
## Explored 0 nodes (0 simplex iterations) in 0.00 seconds (0.00 work units)
## Thread count was 1 (of 48 available processors)
##
## Solution count 2: 3 2
##
## Optimal solution found (tolerance 1.00e-04)
## Best objective 3.000000000000e+00, best bound 3.000000000000e+00, gap 0.0000%
```

`## [1] 3`

`## [1] 1 0 1`

If you see the outputs for `result$objval`

and `result$x`

and you don’t see any error messages, then you have (1) successfully installed the *Gurobi* software suite, (2) activated a valid license, and (3) successfully installed the *gurobi R* package. If do see an error message, then you might have missed a previous step or something might have gone wrong while installing *Gurobi* or activating the license. In such cases, try going back through this vignette and repeating the previous steps to see if that fixes the issue.

If you successfully installed the *Gurobi* software suite and the *gurobi* *R* package, you can now try solving conservation planning problems using the *prioritzr* *R* package. Although the *prioritizr* *R* package should automatically detect that *Gurobi* has been installed, you can use the function `add_gurobi_solver()`

to manually specify that *Gurobi* should be used to solve problems. This function is also useful because you can use it to customize the optimization process (e.g., specify the desired optimality gap or set a limit on how much time should be spent searching for a solution).

Finally, to check that everything has been installed correctly, we will use the *Gurobi* software suite to solve a reserve selection problem created using the *prioritzr* *R* package.

```
# load package
library(prioritizr)
# load data
sim_pu_raster <- get_sim_pu_raster()
sim_features <- get_sim_features()
# formulate the problem
p <-
problem(sim_pu_raster, sim_features) %>%
add_min_set_objective() %>%
add_relative_targets(0.1) %>%
add_binary_decisions() %>%
add_gurobi_solver()
# solve the problem
s <- solve(p)
```

```
## Gurobi Optimizer version 10.0.1 build v10.0.1rc0 (linux64)
##
## CPU model: AMD Ryzen Threadripper 3960X 24-Core Processor, instruction set [SSE2|AVX|AVX2]
## Thread count: 24 physical cores, 48 logical processors, using up to 1 threads
##
## Optimize a model with 5 rows, 90 columns and 450 nonzeros
## Model fingerprint: 0x4bb5d283
## Variable types: 0 continuous, 90 integer (90 binary)
## Coefficient statistics:
## Matrix range [2e-01, 9e-01]
## Objective range [2e+02, 2e+02]
## Bounds range [1e+00, 1e+00]
## RHS range [3e+00, 8e+00]
## Found heuristic solution: objective 2337.9617767
## Presolve time: 0.00s
## Presolved: 5 rows, 90 columns, 450 nonzeros
## Variable types: 0 continuous, 90 integer (90 binary)
## Found heuristic solution: objective 2332.1004028
## Root relaxation presolved: 5 rows, 90 columns, 450 nonzeros
##
##
## Root relaxation: objective 1.931582e+03, 12 iterations, 0.00 seconds (0.00 work units)
##
## Nodes | Current Node | Objective Bounds | Work
## Expl Unexpl | Obj Depth IntInf | Incumbent BestBd Gap | It/Node Time
##
## 0 0 1931.58191 0 4 2332.10040 1931.58191 17.2% - 0s
## H 0 0 1987.3985291 1931.58191 2.81% - 0s
##
## Explored 1 nodes (12 simplex iterations) in 0.00 seconds (0.00 work units)
## Thread count was 1 (of 48 available processors)
##
## Solution count 3: 1987.4 2332.1 2337.96
##
## Optimal solution found (tolerance 1.00e-01)
## Best objective 1.987398529053e+03, best bound 1.931581907658e+03, gap 2.8085%
```

```
# plot solution
plot(
s, col = c("grey90", "darkgreen"), main = "Solution",
xlim = c(-0.1, 1.1), ylim = c(-0.1, 1.1)
)
```

After running this code, hopefully, you should some information printed on-screen about the optimization process and *R* should produce a map displaying a solution. If this code does not produce any errors, then you have successfully installed everything and can begin using *Gurobi* and the *prioritizr R* package to solve your very own conservation planning problems.