Perhaps you had been planning to conduct a phase 1 dose-finding trial using a dose-escalation design built upon any of the usual, one-size-fits-all methods such as the 3+3, CRM, EWOC, mTPI, BOIN, etc. But then somehow you stumbled upon (Norris 2017c), and learned:

- that dose-escalation designs are fundamentally unethical,
- that one-size-fits-all dosing is wasteful—see also (Norris 2017b),
- that a few modifications can convert the inveterate ‘3+3’ dose-
*escalation*design into an efficient ‘3+3/PC’ dose-**titration**design - and that 3+3/PC outperforms even the fancy ‘model-based’ methods, proving definitively that

3+3 is not the problem; 1-size-fits-all dose finding is the problem!

In that case … **this vignette is for you.** Here, we will work stepwise through the process of developing a 3+3/PC design, and simulating its performance.

Your first step in designing a dose-finding trial should be to articulate your expectations regarding the *heterogeneity* of optimal dosing in your patient population. In what follows, I’ll assume we’re working under a *maximum tolerated dose* (MTD) heuristic, so that we denote the optimal dose for individual *i* as MTD_{i} (Norris 2017a). Formally, the most straightforward way to describe MTD_{i} heterogeneity is with a *distribution*:

```
# You might find it easiest to think in terms of CV and median:
0.7 # coefficient of variation of MTDi
CV <- 75 # median MTDi (i.e., 50th percentile)
MTDi50 <-# But R's Gamma distribution will expect that information
# expressed in terms of 'shape' and 'scale' parameters:
CV^-2
shape <- MTDi50/qgamma(0.5, shape=CV^-2)
scale <-# Plot:
0:200
MTDi <- dgamma(MTDi, shape=shape, scale=scale)
dens <-xyplot(dens ~ MTDi, type = "l"
xlab = expression(MTD[i]*' [mg/kg]')
, ylab = "density") ,
```

A *density* as plotted above has a natural intuitive appeal, in part because it shows clearly the central tendency of the distribution, and depicts rare individuals extending into its ‘tail’ to the right. (To appreciate what motivates the particular choice of the Gamma distribution here, please see (Norris 2017b).)

More directly useful than this density, however, is the corresponding *cumulative distribution*:

```
pgamma(MTDi, shape=shape, scale=scale)
F <-xyplot(F ~ MTDi, type = "l"
xlab = expression(MTD[i]*' [mg/kg]')
, ylab = "Cumulative Distribution"
, panel = function(...){
, panel.xyplot(...)
panel.refline(h=0.5)
panel.refline(v=MTDi50)
})
```

Whatever a cumulative distribution sacrifices in terms of direct visual appeal, it makes up for with its practical utility. As shown by the crosshairs superimposed on this plot, you can read straight off this plot the median MTD_{i} of 75 mg/kg that you had posited above.

Before moving on, let’s introduce one final modification to this cumulative distribution, which should look familiar to the oncology trialist:

```
xyplot((1-F) ~ MTDi, type = "l"
xlab = "Dose [mg/kg]"
, ylab = "Fraction Tolerant") ,
```

As you can see, we’ve simply flipped the cumulative distribution vertically. (To appreciate this in the code, note that the plotting formula has changed from `F ~ MTDi`

to `(1-F) ~ MTDi`

.)

By inverting the customary mathematical treatment, we avoid an unnatural inversion of our *clinical* language. Thus, we can now speak about *what fraction of patients will tolerate any given dose.* For obvious reasons, (Norris 2017c) calls this a ‘dose-survival curve’.

The *precautionary coherence* (PC) principle introduced in (Norris 2017c) requires that “a PC trial conducts escalation only through titration.” Please see that paper or this lay explainer for a fuller discussion. To appreciate the ethical content of the PC principle in an especially vivid way, you might try imagining yourself in the trialist’s place in this scenario.

As with so much of the terminology in the thoroughly muddled field of dose-finding methodology, the term ‘dose ranging’ is subject to a variety of confusing usages. What I find most useful about this term is that the word *range* underscore the uncertainty inherent in optimal dosing, helping to debunk the false sense of certainty implied by usage such as *‘the’ MTD* (Norris 2017a).

In my view, a *dose-ranging study* in general opens with a proposed range of doses that researchers initially deem reasonable to try in participants. As the study proceeds, researchers learn from the accumulating data, and revise their proposed range. For some historical background on dose ranging—albeit in a chronic-disease context—see (Sheiner, Beal, and Sambol 1989).

As you will see, the 3+3/PC is very much a dose-ranging design in this sense. It begins by laying out a discrete set of (a half-dozen or so) doses that cover some range the trialists consider reasonable. (The trialists may base their considerations on preclinical studies, for example.) At the low end of this range, the trialists will posit a dose they feel reasonably sure is safe. Conversely, at the top end of the range, the trialists will include a dose they think should suffice to deliver the postulated benefits of the drug. As the study proceeds, the trialists may discover that the dose range they initially ‘staked out’ requires modification. They might realize they can safely pull up some of the stakes at the lower end, if most patients easily tolerate these doses. The same applies at the high end, for the opposite reason: some of the higher doses may prove toxic to a great majority of patients.

Returning to our example study, suppose that you decide to explore 7 doses spanning the range from 25 to 200 mg/kg. The ends of this range are a factor of 8 apart, rendering a geometric sequence highly suitable:

```
25 * (200/25)^(0:6/6) # geometric sequence 25..200
doses <- round(doses/5)*5 # round to the nearest 5 mg/kg
doses <-names(doses) <- 1:7 # label the doses 1..7
doses
```

```
## 1 2 3 4 5 6 7
## 25 35 50 70 100 140 200
```

For context, let’s see these 7 doses overplotted against our posited MTD_{i} distribution:

```
xyplot(dens ~ MTDi, type = "l"
xlab = expression(MTD[i]*' [mg/kg]')
, ylab = "density"
, scales = list(x=list(log=FALSE, at=doses))) ,
```

Re-plotting over a *logarithmically scaled* dose axis, we see our geometric sequence of doses becomes ‘evenly spaced’. Furthermore, the evident ‘rectification’ of the Gamma distribution’s skewness indicates that our choice of Gamma distribution may have been appropriate to the logarithmic span of our uncertainty about dosing:

```
xyplot((dens*MTDi) ~ MTDi, type = "l"
xlab = expression(MTD[i]*' [mg/kg]')
, xlim = c(10, 200)
, ylab = expression("density of",log(MTD[i]))
, scales = list(x=list(log=TRUE, at=doses))) ,
```

Likewise, this same scaling somewhat ‘straightens out’ our dose-survival curve:

```
xyplot((1-F) ~ MTDi, type = "l"
xlab = "Dose [mg/kg]"
, xlim = c(20, 200)
, ylab = "Fraction Tolerant"
, scales = list(x=list(log=TRUE, at=doses))) ,
```

Of note, the increases between doses are by a factor of \(\sqrt[6]{200/25} = \sqrt{2} \approx 1.41\), matching the 40% “dose-step increments” for which (Simon et al. 1997) provides some precedent.

Having decided what doses to trial, let’s see what we might learn if we enrolled 24 participants in a 3+3/PC titration study that runs for 10 dosing intervals.

```
24
N <-set.seed(2019) # setting RNG seed makes sim reproducible
new("DE", doses=doses,
trial <-MTDi=rgamma(N, shape=shape, scale=scale),
units="mg/kg")
titration(trial, periods=10)
trial <- plot(trial) viz <-
```

Like the dose-titration design it depicts, this diagram is fairly rich. Exploring the interactivity of this diagram seems to me essential for developing a full understanding of it. (By contrast, diagrams for dose-*escalation* designs are typically quite austere. You can find examples of those in (Cheung 2005) or in this online presentation by the same author.)

Following a custom first established in explosives research (Dixon and Mood 1948), X’s represent toxicities and the O’s tolerated doses. To compensate for the ‘crowding’ caused by titration, I have introduced several visual aids to help follow individuals as they percolate through this diagram. A cycle of 4 (colorblind-friendly) colors helps discriminate between the cohorts enrolling in successive periods. Left-to-right positioning distinguishes the 3 individual participants within each cohort. Furthermore, when you hover over an individual’s marker, a gray ‘trace’ tracks that participant’s titration course. If you hover over participant 11, for example, you will see that she is the middle participant in the magenta-colored cohort that enrolled in period 4. (Notice that the cycle of colors repeats, so that the final cohort enrolling in period 8—i.e., participants 22, 23 and 24—also get magenta markers.)

The simulated trial realization depicted here illustrates nearly all of the rules described on page 3 of (Norris 2017c):

**PC rule**In this diagram, escalation (i.e.,

*trying a*) occurs**new**higher dose**only through titration.**Thus, the period-2 escalation to dose level 2 is accomplished by titrating the (green) period-1 cohort upward. In standard dose-escalation trials, which violate the PC principle, the (orange) second cohort (participants 4–6) would have leapfrogged the first and enrolled straight into dose level 2. Worse, the (purple) third cohort would have enrolled straight into dose level 3. Why is that so bad? Notice that participant 9 has an MTD_{i}of 23.8 mg/kg, and so cannot even tolerate the 25 mg/kg of dose level 1. How much worse would it have been for him to enroll straight into dose level 3! (This explains the ‘precautionary’ in PC.)**cohort rule**To preserve the ‘3+3’ spirit of the 3+3/PC design, we titrate upward to a new dose only when a cohort of 3 or more participants has ‘accumulated’ at the next-lower dose. This is why no escalation occurs in period 4. Because participant 2 had a DLT in period 3, only participants 1 and 3 were eligible to escalate to the not-yet-tried dose level 4. Accordingly, they had to wait until (orange) participants 4–6 joined them in period 4, providing a ‘quorum’ for escalation in period 5.

**bypass rule**The 3+3/PC design accumulates DLTs into the

*dose-survival curve*on the right-hand side of the diagram. (In what follows, I will discuss that curve as if you were turning your head 90 degrees to the left to view it.) Click the period divider between periods 5 and 6, to see what the dose-survival curve looked like at the end of period 5. As you’ll see, the (dashed) 80% confidence band around the (solid) Kaplan-Meier-style dose-survival plot sits just above the 0.8 threshold at this point. (The lower bound in fact hovers at 0.8013.) According to the*bypass rule*, we take this to indicate that this dose can be abandoned as a starting dose for newly-enrolled participants. This is why the (orange) 6th cohort (participants 16–18)*bypass*dose level 1 to enroll straight into dose level 2. Note that a similar thing happens again in period 7, resulting in the further bypassing of dose 2.**reduction rule**&**exit convention**After experiencing a DLT, a participant drops to the next-lower dose. Thus participant 2, having experienced a DLT at dose level 3, will drop back to dose level 2 in subsequent periods. Since this is ‘understood’, we need not carry particpant 2 forward in this already quite busy diagram. Thus, the ‘exit convention’ applies, and we can drop this participant’s marker in period 4 and subsequently. (Of course, this does not mean we forget the DLT. The DLT remains as recorded within the accumulating dose-survival curve.)

**stop rule**Note the vertical dashed line superimposed on the period divider at the end of period 9. This indicates that the

*stop rule*activated. You can see why by clicking alternately the period-8 and period-9 dividers. Observe that the 80% confidence band at dose 6 straddles the fine red threshold after period 8, but drops completely below it after period 9. This is taken to indicate that this dose is where escalation should stop.

The one 3+3/PC rule *not* demonstrated here is the *rollback rule*, effectively a more stringent version of the stop rule. Please see (Norris 2017c) for details.

In the above realization, it does appear that participants 20, 21 and 24 would have been better off if the second low-dose bypass (in period 7) had not occurred. It should be noted, however, that these participants drew ‘unlucky’ MTD_{i}’s from the population distribution. Indeed, participant 20—with an MTD_{i} of 7.9 mg/kg—ranks at the 99th percentile of the simulated population, in terms of sensitivity to the toxicity of this drug.

Rather than examining just 1 possible realization of this trial, you should of course undertake a systematic effort to examine many realizations. You should also examine different scenarios for the distribution of MTD_{i}. The DTAT package includes a 3+3/PC design-and-simulation app, enabling you to take some first steps in that direction. You can access it from the R console, like this:

`runDTATapp('Sim33PC')`

Cheung, Ying Kuen. 2005. “Coherence Principles in Dose-Finding Studies.” *Biometrika* 92 (4): 863–73. https://doi.org/10.1093/biomet/92.4.863.

Dixon, W. J., and A. M. Mood. 1948. “A Method for Obtaining and Analyzing Sensitivity Data.” *Journal of the American Statistical Association* 43 (241): 109–26. https://doi.org/10.1080/01621459.1948.10483254.

Norris, David C. 2017a. “Dose Titration Algorithm Tuning (DTAT) Should Supersede ‘the’ Maximum Tolerated Dose (MTD) in Oncology Dose-Finding Trials.” *F1000Research* 6 (July): 112. https://doi.org/10.12688/f1000research.10624.3.

———. 2017b. “Costing ’the’ MTD.” *bioRxiv*, August, 150821. https://doi.org/10.1101/150821.

———. 2017c. “Precautionary Coherence Unravels Dose Escalation Designs.” *bioRxiv*, December, 240846. https://doi.org/10.1101/240846.

Sheiner, L. B., S. L. Beal, and N. C. Sambol. 1989. “Study Designs for Dose-Ranging.” *Clinical Pharmacology and Therapeutics* 46 (1): 63–77.

Simon, R., B. Freidlin, L. Rubinstein, S. G. Arbuck, J. Collins, and M. C. Christian. 1997. “Accelerated Titration Designs for Phase I Clinical Trials in Oncology.” *Journal of the National Cancer Institute* 89 (15): 1138–47.